the drum sound

on the BD there is somethign really fucking cool going on!

how do i make that effect?!

try with different distortion and compressions?

it happens when you turn the rez up on a certain piece of equipment... or something...... i forgot - useless post

K___ ___-20

yeah i remember you use this certain synth with some modulation on... uhm.. dont remember.

  Mr. Cool Ice said:

K___ ___-20

org ms

just like all early rdj.

rez beating with the MS-20... plus

MS-10, MS-50 expander and SQ-10

that's what those patch cables are made for

so it isnt just distortion wile knob twisting the 909 bass drum knobs?

  chris moss acid said:

so it isnt just distortion wile knob twisting the 909 bass drum knobs?

that's gabber

  chris moss acid said:

so it isnt just distortion wile knob twisting the 909 bass drum knobs?

yea, looks like you have to buy a ms-20

  Mr. Cool Ice said:

  chris moss acid said:

so it isnt just distortion wile knob twisting the 909 bass drum knobs?

yea, looks like you have to buy a ms-20

i think i might do that after i get my 606 & 101 then a ms-20

there is one on ebay for like.. £680

I didn't know Squarepusher used an MS-20.

Personally I just use a sine based kick with a long release, then through a resonant filter and then through an amp simulator. Amps tend to resonate at certain frequencies due to the speaker they're coming out of.

  chris moss acid said:

  Mr. Cool Ice said:

  chris moss acid said:

so it isnt just distortion wile knob twisting the 909 bass drum knobs?

yea, looks like you have to buy a ms-20

i think i might do that after i get my 606 & 101 then a ms-20

 

there is one on ebay for like.. £680

Way too much money if you ask me... I bought mine back in the 90's for £300 when they were considered pretty mediocre - Poor man's SH-5...

With the MS-50 and SQ-10 it's wicked, or if you've got a few MS-20's you can patch together, but without it's way too limited - I could get some good zaps and you can do the Isoprophlex style bass drums easily, but not much else... For £700 I'd be looking at an SH-5 or better bet, an Analogue Systems modular with EMS Synthi and Moog filters ('bout £1000)...

Other thing with the Korg MS synths is they're hz/volt (or something) so you can't sequence them from the 303 very easily... You can have it follow pitches from the audio out (of the 303) but it's a bit sketchy...

I wouldn't be suprised if richard used some of that home-made distortion on a lot of those bass sounds... Guitar amps are quite good for that kind of thing - Lots of tone controls...