Jump to content
IGNORED

mixer, barely knew her!


Recommended Posts

so i have this 16 channel mackie mixer. it's the same type dmx krew uses, whatever, i know.... the thing is it's a bit hissy. i'm doing everything on hardware now and i'm wondering if this is going to be a very bad thing. if you heard hiss in a track what would yer reaction be?

could i maybe filter it out on cool edit when i'm done and after i save the master mixdown as a wav?

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/
Share on other sites

If I like the music I wouldn't give a fuck. I'd want higher quality, but I'd be happy just to have some new music. I'm a picky fuck.

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655498
Share on other sites

I doubt its the mixer causing the issue. Unless you have some equipment that is providing a seriously weak signal that you're having to boost with a ton of gain, even cheap mixers are pretty quiet. I'd say its far more likely somewhere else along the path (like the method by which you are recording, or some of your gear itself or some of your cables).

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655525
Share on other sites

nope it's def the mixer, it has issues, lights that stay lit, fader movement static, and the ever present buzz.

it's a solid machine though,

would it be wise to try and remove hiss with a program like cool edit?

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655533
Share on other sites

You get static bursts when you move the faders? Cracking it open and cleaning contacts might help if that's the case. Could the "Buzz" be a ground loop hum?

 

Waves X-Noise does a fairly decent job of getting rid of noise, but there's a very fine line for it between "helped some" and "waug, sounds like everything is being run through some shitty filter/FFT effect".

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655535
Share on other sites

well it was taken to shop to fix it up a bit and supposedly the dude fixed a bit of the noise but really wasn't that accustomed to fixing mixers so he couldn't do much. supposedly most of the noise is gone,though, i havebn't been able to plug it in yet. i have a feeling he didn't do a stellar job as he didn't even charge for his work.

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655536
Share on other sites

  hahathhat said:
plz post recording of the noise

 

 

depending on whether it's a hiss, buzz, or hum, i'd recommend different courses of action.

 

can do, later on in the week i will. cheers

Link to comment
https://forum.watmm.com/topic/30811-mixer-barely-knew-her/#findComment-655793
Share on other sites

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 Member

×
×