Korg Volca series

  On 5/3/2014 at 2:09 PM, Squee said:

Does anyone else get a really high frequency from the keys?

No, not that I've noticed. Is it still there if the delay feedback is all the way down?

me neither.

Can anyone recommend a good cheap secondhand hardware/guitar pedal compressor do go along with the Volca Bass as I'm interested in purchasing one? Safe! :D

Legowelt really likes those Boss Compressor/Expanders.

Interesting aren't they a bit pricey though? Got any specific models you could recommend?

Oops I meant compressor/sustainer. The CS-1 and CS-2.

You could also get a FMR RNC for like $100 used. It's a very small piece of rackmount, and it's really a great compressor.

Or honestly, just grab anything. Shitty is pretty.

Yeah that compressor is a bit out of my price range. Probably looking to spend no more than £40 for a secondhand one. Thanks anyways man.

Behringer pedals are good cheap clones. I'm sure they do a compressor. None of mine have failed on me and I've been using them live and in studio for over five years.

  On 5/4/2014 at 10:51 PM, modey said:

Behringer pedals are good cheap clones. I'm sure they do a compressor. None of mine have failed on me and I've been using them live and in studio for over five years.

Yeah I was thinking Behringer. I'm pretty certain they do a compressor for peanuts lol.

yeah it's like £17

  On 5/5/2014 at 1:20 PM, 2WV said:

yeah it's like £17

Is this the one? http://www.dv247.com/studio-equipment/behringer-compressor-sustainer-cs400-effects-pedal--82078

yeat that's it

Track made with Volca Beats, Keys and Bass + some shit built in FX on my new well cheap mixer:

https://soundcloud.com/b-c-m/brian-branch-acid

Nice track, dude. I dig those detuned synths.

I just need to get the Beats unit and I'll have them all. I also need to get a proper audio interface with a few midi outs so I can really utilize them.

Just modded my beats' snare, 5min of work, sounds so much better!

yeah I've been looking into that....is it easy? don't want to fuck up my beats. well, I do want to fuck up my beats, but in a different way.

fuck up your beats.

beats.

I was going to try the snare mod soon as it's apparently become a lot easier than it used to be. Someone found out that you can solder the capacitor into the spot where the missing component is rather than soldering on top of an existing one, so it's much harder to damage the PCB. I'm also going to add a midi thru port so I can add it to my chain, which it apparently pretty easy too.

  On 5/7/2014 at 2:55 AM, Mesh Gear Fox said:

 

  On 5/3/2014 at 2:09 PM, Squee said:

Does anyone else get a really high frequency from the keys?

yup. both the keys and the beats I borrowed from my mate have a freq in there way above 20khz. if I record in 96khz then down sample to 44.1 with average interpolation it comes through as a high pitched tone :(

That fucking sucks. I thought it was my cable. Luckily I low pass everything...

Yeah it's easier now to mod the snare, just solder one cap in the empty C78 position. You still need a fine tip, but I managed to finish it in 5 minutes.

Jammed this out with Volca Keys, Electribe ES-1 and Beatstep lastnight:

https://soundcloud.com/pselodux/gvrodin

Beatstep -> Volca Keys -> cheap phaser -> Behringer reverb -> ES-1

with gate being controlled by the Audio In pattern on the ES-1; post-reverb so I could fuck with the tails.. and everything going through the on-board compressor. Sounded fucking mental!

It'd make a very easy live setup as well, since it ends up being one output without even needing a mixer. It's also dynamic as fuck—the above jam was cut from a 30min session that started off sounding like Tangerine Dream or something.

  On 5/10/2014 at 3:17 AM, BCM said:

Track made with Volca Beats, Keys and Bass + some shit built in FX on my new well cheap mixer:

 

https://soundcloud.com/b-c-m/brian-branch-acid

this is awesome

---

Can't control the volca bass, i might me i'm a bit dumb but it seems like the sound its stuck in this very annoying low pitched tone (to be fair to me i've only played around with the bass a couple of time)

  On 6/4/2014 at 1:22 AM, modey said:

Jammed this out with Volca Keys, Electribe ES-1 and Beatstep lastnight:

https://soundcloud.com/pselodux/gvrodin

 

Beatstep -> Volca Keys -> cheap phaser -> Behringer reverb -> ES-1

 

with gate being controlled by the Audio In pattern on the ES-1; post-reverb so I could fuck with the tails.. and everything going through the on-board compressor. Sounded fucking mental!

 

It'd make a very easy live setup as well, since it ends up being one output without even needing a mixer. It's also dynamic as fuck—the above jam was cut from a 30min session that started off sounding like Tangerine Dream or something.

man, that was tas-ty!

One question, how easy do you find it to save/back-up the midi information of the beatstep sequences you make? And once saved, have you tested re-triggering the same instrument (Volca keys) via a DAW with the same midi info to see if it plays exactly as it did when you first made it?

I always find the sequences I make up on the fly with my Darktime never transmit exactly the same way once i've backed it up and am later sequencing it via Live.

Thanks!

edit: oh wait, you mean actually exporting to DAW track? I haven't tried that.. Not sure if it's possible to dump sequences to MIDI file via usb; I have a feeling that it would need to be manually recorded.